Llaminate your prints? For some, it is a matter of course, while others avoid it consciously. In this article, we will discuss the 7 most important advantages of Laminating your print products. The laminate may be the last step in your production process, but he is certainly not unimportant! And so your next assignment with laminate is a success, we will give you, in conclusion, some practical tips.
1. The lamination makes your print material is thicker and more robust
The lamination is applied to the transparent film makes the printed Material is thicker and more resistant to mechanical wear and tear. Therefore, it is important to ask yourself whether your printing material is deformed by the use of wrinkled/. If this is the case, we recommend lamination for protection. The decision for a lamination has several advantages. For example, a laminated sticker is easier to install, the risk of air pockets under the sticker is low and the sticker is protected against deformation better. In addition, the stickers can be easier to remove if you want to do so in the future.
2. Lamination protects against UV-radiation
If your printed product influences many of the environment, such as, for example, exposed to the sun, there is a high risk of discoloration. UV-B rays can fade the color. The laminate with a protective film with a built-in UV-slows down protection, or prevents this process and ensures that your prints will keep much longer your beauty.
3. Laminates to protect against moisture and dirt
The laminating of their Work also prevents moisture from entering into your printing products and dirt remains, for example, from greasy fingers on them. So your prints are not only protected from water damage, but it can also be easy to clean. This is very handy if you have to do with external applications or, for example, in menus in the Restaurant.
4. Laminating protects against damage
Cracks and creases have no Chance if your work is properly laminated. Through the use of a scratch-resistant material, you can provide your print-products with a scratch-resistant layer. This is often used in print media for a Pop-up systems. These media must during Transport, and removal is much to endure. Therefore, it makes sense to laminate commonly used media for pop-UPS, Roll-Ups, in order to protect them better.
5. Laminating gives a luxurious appearance
The laminating – as a finishing – is a finishing technique that lends printing Products a luxurious and distinctive look. By laminating the paper appears to be solid and feels firmer, reducing the quality is better and also after that, looks like. There is a wide range of finishes, the satin of matt, gloss, high gloss rich. Depending on the intended use of the print material, you can choose the most suitable finishing. For glossy laminates, the colors, for example, better. And the use of Matt foil prevents disturbing light reflections, for example in the case of photo posters.
6. Lamination increases the service life
The protective layer of the laminate, also increases the life of your print materials. You have to remember that prints are not protected against mechanical or environmental influences that have a limited service life. Therefore, one can say that the Application of a protective film, the print service life is extended and its value guarantees. An important final touches!
7. A laminate gives your print special features
In addition to the above mentioned Standard laminating films, there will also be laminating films with special properties.
, For example:
- To prevent adding a non-slip Texture to floor graphics: a slipping and to protect it from moisture and dirt
- Creating a writable surface for Whiteboard applications: for example, ideal for maps
- Prevention of vandalism by the addition of Anti-Graffiti properties: color and permanent markers can be used with cleaning agents easy to remove
- Providing a scratch-resistant layer with the above-mentioned display: scratches are, for example, on a Pop-up media less visible
Make your next lamination project to be a success!
Tips for successful lamination
Are you convinced of the benefits of Laminating? Then it’s up to you, the laminate is successfully applied. We can help you with our tips and instructions:
- You can work clean, dry, dust – and grease-free: Use a PCR roller to remove dust and dirt.
- Use as often as possible in the same material combinations: a PVC Monomer laminate for a PVC Monomer pressure of the material and, for example, Polyester, Polyester – → a Suitable base materials with similar behavior, which prevents, for example, a Shrink of the edges. – Drying time: pay Attention, in particular, during the laminating process of ink-jet printing to the fact that the inks to dry sufficient and fully cured, consider a drying time of at least 24 hours.
- Silvering avoid: A fine air pocket between the print and the laminating film is known as Silvering. Silvering may be due to the fine structure of hard to find and especially with the dark Print is striking. If you heat up the role during Lamination slightly to 30 degrees, is flowing the adhesive and prevent the effect of the Silverings.
- Release the pressure after laminating for 24 hours to rest: Let the pressure after laminating for 24 hours at room temperature before proceeding with further Work. This ensures optimum adhesion of the adhesive and allows the film to relax“..
- Laminated prints ship: If you want to send your printed Material rolled up, make sure you roll up the Material with the image side out on a large core. This prevents the coiled pressure tunnels after the Roll.
